Airfit Bike 2.0
AIRFIT BIKE 2.0 OVERVIEW
THE SMAI AIRFIT BIKE 2.0 HAS BEEN CAREFULLY CRAFTED TO OFFER YOU THE ABSOLUTE BEST AIR RESISTANCE BIKE AVAILABLE. FEATURING EASY ADJUSTMENT OPTIONS AND A NEW HANDLE BAR CONFIGURATION THE AIRFIT BIKE 2.0 IS DESIGNED TO CHALLENGE THE TOUGHEST ATHLETES. WITH THE SPECIFIC ABILITY TO TARGET YOUR UPPER AND LOWER BODY THE AIR BIKE IS THE PERFECT ADDITION TO ANY SPACE.
DESIGNED WITH THE FINEST MATERIALS FOR DURABILITY, IT FEATURES AN IMPROVED FRAME DESIGN AND UPGRADED COMPUTER CONSOLE.
WHY CHOOSE THE SMAI AIR FIT BIKE?
SEAT POST SURFACE TREATMENT
30 X 60MM SQUARE
10MM FRONT FAN
17MM REAR CRANK
1300 X 600 X 1230 MM
410 CHAIN + J6 BELT
SANDBLASTED, CHROME PLATED AND ANTI-RUST COATED
10MM FRONT FAN
20MM REAR CRANK
1340 X 620 X 1265MM
QUIETER UNDER SPEED
AND MORE DURABLE
STRONGER HANDLES WILL
NOT BREAK AS EASILY
MORE STABLE CONSTRUCTION
BETTER PROTECTION AGAINST RUST ISSUES ARISING FROM SWEAT
STRONGER AND MORE DURABLE
OUT IN THE WORLD
COMPUTER DISPLAY FEATURES
SET BY AGE
Change your settings and program based on your age
Press start for manual operation or you can choose from one of the 7 Preset programs on the right side of the console for the specific programs.
These are displayed on screen for all programs.
Intervals will be displayed on screen along with the rest period such as: 20/10 (20 second workout /10 second rest period) 10/20 (10 second workout / 20 second rest period) or custom interval, where you select the time of your workout using the arrows and enter key along with the desired rest period.
TOTAL TIME DISPLAY
Will count up the total program run time while the larger numeric display will count the work and rest segment time. The 88/88 display shows the current interval and the total number of intervals in the program.
TARGET TIME, DISTANCE AND CALORIE DISPLAY
Programs can be set and are all displayed on the target display panel together.
Pressing it for a second will cause a temporary pause in the desired program however holding the stop button will clear all your settings and data and take it back to a reset standby mode.
In standby mode the console will enter sleep if left for 30 seconds. Console will switch off after 1 minute of non-use.
Note: If your console is powering on and you are not receiving vital stats to the Console you need to check the following things prior to calling SMAI:
- There needs to be a determination of whether the fault lies in the cable or the console.
- Check the console and cable are correctly plugged together
- Check the cable sensor (on the right side of the frame) and the Magnet (within the fan) have no more than a maximum 10mm spacing between one another
- If these have been checked and the console is still not receiving information it is possible that the cord needs to be replaced.
- You can test if the cable is working by testing the voltage as the Cable works at 4 OHMS